Seal
The line between
dry and damaged
is thinner than you think.
600+
Joints Sealed
2 hrs
Avg. Job Time
5★
Avg. Rating
The Problem
A shower corner crumbling with black mold — the caulk had split three years ago and been painted over twice.
The Fix
We stripped the old sealant with a oscillating tool, let the substrate dry overnight, then laid a single-pass bead of mold-resistant silicone. Tooled with a wet finger and left with a 24-hour cure window. The corner looks like it was tiled yesterday.
The Problem
A bay window whistling every time the wind shifted — the original sealant had shrunk away from the frame leaving a 3mm gap all the way around.
The Fix
We cleaned the frame with isopropyl, applied a foam backer rod to the deep sections, then ran a continuous bead of paintable acrylic sealant. Tooled flush with the frame profile. The whistle stopped before we packed up.
The Problem
A restaurant failing its health inspection — the caulk between the prep counter and wall had pulled away and was harboring bacteria in a 6-inch run.
The Fix
We arrived at 6 AM before service, stripped the old joint, prepped with food-safe cleaner, and applied NSF-certified silicone rated for commercial kitchens. Re-tooled twice to ensure zero voids. The inspector passed them the next morning.
Ready when you are
Most jobs done the same week.
No mess. No guesswork. Just a clean line.
Portland metro area · Free estimates on jobs over 3 linear feet
Three steps.
Then we handle the rest.
Why clients come back
"I watched them work for two hours and didn't hear a single wasted word. They left the bathroom cleaner than they found it."
Margaret Thornton
NE Portland homeowner
"Passed our health inspection on the first re-inspection. The inspector actually mentioned the quality of the seal."
David Park
Restaurant owner, Hawthorne
"I've used three caulking services in ten years of property management. These two are the only ones I call now."
Sandra Okonkwo
Property manager, 22 units